3D Printing Stack Exchange
3D Printing Stack Exchange

Questions tagged [bambu]

14 questions
4
votes
2 answers

Printer enclosure vs higher humidity room?

I bought the BambuLab X1-Carbon without considering where to put it, and now I realize there are only two options: My small studio room where I also work. The utility closet, which houses my washer/dryer. Studio Room: The issue here is that I…
kettlepot
  • 141
  • 1
4
votes
3 answers

Do PEI beds have a maximum safe usage temperature?

I have a generic smooth PEI bed and a Bambu PEI textured bed. I've never used this bed material before and so have no experience with it. Does PEI have a maximum safe usage temperature or at least one that I could reasonably reach during 3D printing…
Aaargh Zombies
  • 2,320
  • 2
  • 20
  • 43
3
votes
2 answers

How can I send G-code to a Bambu Labs X1/X1C?

What are the ways that G-code can be sent to a Bambu Labs X1/X1C?
chobok
  • 295
  • 3
  • 6
2
votes
0 answers

Snap-fit stackable boxes that won't print flat

I have designed and printed two boxes with snap-fit lids, which also allow for the boxes to be stacked and snapped together (the lid and bottom of the box both have the same recessed channel with snaps). The first style is a narrower design where…
Steve
  • 121
  • 2
2
votes
1 answer

Seeking a Centralized Interface Solution for Managing Multiple 3D Printers in a MakerLab

I'm responsible for a MakerLab in an engineering school, equipped with a diverse set of 3D printers: 5x Prusa MK3s+, 2x Prusa MK4, 2x Bambulab X1 Carbon, and 1x Formlab. Students currently initiate prints via USB/SD card on a shared PC. We're aiming…
nowox
  • 131
  • 4
2
votes
2 answers

Can "unnecessary" supports be used effectively to improve bed adhesion on objects with a low surface contact area?

I have a number of models to print that are supposed to be orientated in a specific way for printing so the layer lines go in the same direction (purely aesthetic), and to ensure that shrinkage occurs evenly so that they fit together nicely (and so…
Aaargh Zombies
  • 2,320
  • 2
  • 20
  • 43
2
votes
1 answer

What happens to Bambu printers if they loose wifi connectivity during a print and are unable to recover it?

For the current range of Bambu Printers (P1P\X1-Carbon). If you store your files in the cloud and initiate a print through the phone app to the printer using wifi, what happens to the print if the printer loses wifi connectivity for an extended…
Aaargh Zombies
  • 2,320
  • 2
  • 20
  • 43
2
votes
0 answers

How to prevent holes in external perimeter

This dinosaur was printed on a Bambu Lab X1 Carbon with AMS, with 3rd party filament. Sliced with "Generic PLA" profile in Bambu Studio. I understand that the zits probably happen at layer change, or hops to another location on the same layer. I…
Gauthier
  • 181
  • 4
1
vote
0 answers

Fusion threads for 3D printing canister w/ lid

I am running into issues when 3D printing threads that I've created in Fusion. I am confident it's not the printers, but either something in Fusion or in the slicer. Threads in Fusion: Offset: 0 Length: 3 mm Thread Type: ISO Metric profile Size:…
Adam12344
  • 113
  • 4
1
vote
1 answer

How to properly measure sizes of models in Blender?

I created simple cube in Blender with Dimensions 2mx2mx2m and exported it as *.stl. When I open it in BambuStudio I get sizes of element as 2mmx2mmx2mm. Same strange thing happens with stls I downloaded from the internet, they also show hundreds…
Online Zakaz
  • 11
  • 1
1
vote
0 answers

How do you increase the flow rate for the bottom layers only in Bambu Studio?

I'm moving from a Creality printer to a Bambu printer using Bambu studio. I often do prints with large flat top surfaces upside down on the bed, and increase the flow rate for the bottom layers only so that the filament from each pass flows more…
Aaargh Zombies
  • 2,320
  • 2
  • 20
  • 43
0
votes
0 answers

How can I switch to the next spool in the menu?

I started a print one a P1 that would exceed the amount of filament left on the spool. Therefore I put another one into the second slot of the AMS as I had heard that the P1 is capable of continuing on another spool automatically. I did not realize…
the third dimension
  • 658
  • 6
  • 14
0
votes
1 answer

How to use Bambu Studio with a Prusa Mini+?

I would like to use Bambu Studio with a Prusa Mini+ (I have my reasons ...). However by default this printer does not exists in Bambu Studio. Is it possible to add this printer? How?
Benoit74B
  • 101
  • 1