3D Printing Stack Exchange
3D Printing Stack Exchange

Most Popular

more tags
1500 questions
5
votes
1 answer

How to stop Fusion 360 from creating a new version on STL export

Everytime I export to STL in Fusion 360, a new Version (V1, V2, V3, V4, ...) of the file is created. But I would really like to use that feature to mark bigger changes instead of creating a new version everytime I change a minor detail to see how…
JuSchu
  • 153
  • 3
5
votes
2 answers

What temperature should I bake PLA prints at to increase strength?

I recall seeing that it's possible to "bake" or "anneal" or even "remelt" PLA prints to strengthen them. As I understand it, the main effect is improving layer adhesion, which is the main source of weakness in tension in the original Z-axis…
Zeiss Ikon
  • 1,870
  • 2
  • 11
  • 31
5
votes
2 answers

Jagged edge on one side and not on the other side

As you can see the left side of the edge came out jagged. The right side came out just fine. What happened to the left side? I am using Ender 3 + BLTouch using Sunlu PLA+ with 200 °C hotend. Here are my retraction settings (if that matters):
notalentgeek
  • 191
  • 1
  • 1
  • 7
5
votes
1 answer

Perimeters/shells not properly fusing - delamination

I come to you all in my time of need, as I have nowhere else to turn. I’ve been a 3D printer for about two years now. I have an Ender 5 Plus. Up to this point, all of my prints were fine straight out of the box; no need to calibrate anything besides…
Adrian
  • 71
  • 4
5
votes
1 answer

How should I finish a food safe print?

I'd like to print a mouse shell from food safe PLA. I need it to be food safe, because sweat can dissolve any harmful chemical from it just like foods. I am not sure about how to finish it after sanding the result. I read that people use food safe…
inf3rno
  • 193
  • 5
5
votes
3 answers

Help printing in ABS

My first attempt to print in ABS has been an unmitigated disaster, and I could do with some advice before I try again. I've been trying to print a Bean Hopper Extension for Melitta Barista TS Smart coffee machine, but every time the layers separate,…
Mark Booth
  • 335
  • 2
  • 16
5
votes
4 answers

Ender 3 v2 intermittent problem - clearly visible layers

I bought an Ender 3 v2 in January 2021 for my second printer. I have had an Ender 3 for two years and love the quality it prints. This new printer has been plagued with issues since day one. Creality sent me a new mainboard and fan due to issues.…
Nic7
  • 51
  • 3
5
votes
1 answer

How to unload filament without cancelling print

I have a Prusa MK3s MMU2s which I was running a 7-hour print job on. It had two spools of filament in, a blue one (primary, very little left) and a gold one (secondary, quite a lot left). It ran out of blue filament approximately 75% through the…
nerdguy
  • 53
  • 3
5
votes
4 answers

How to improve this Benchy? BIQU B1

I have just acquired my first 3D printer, a BIQU B1. Overall I'm quite pleased with the printing results but I'm having minor defects on the Benchy test. I'm not sure what the problem is, but I guess it's related to the overhang and maybe…
Celtc
  • 71
  • 1
  • 6
5
votes
1 answer

Why does OpenSCAD fail to cut holes in polygon sides that are exactly the width of the wall?

I'm trying to make a frame for a lithograph that I plan to 3D print for my wife for Mother's Day. I typically will have my differences be exactly the right size (rather than oversizing it for the sake of the preview) because it gives me a good feel…
D. Patrick
  • 165
  • 6
5
votes
2 answers

Wanhao i3 PLUS restarts when connecting USB

I just received my Wanhao Duplicator i3 PLUS. Everything prints and functions fine via SD card and the display but when connecting to my Mac computer the printer seems to restart. Baud Rate: 115200 Serial Port: /dev/tty.wchusbserial1420 Any ideas…
JRomero
  • 193
  • 1
  • 7
5
votes
3 answers

Noise cancelling Chiron Y-axis

I want to be able to run my Chiron during night-time, but my neighbours tries to sleep at that time of day. I have put a lot of effort into making the printer silent. The controller-fan and power-supply-fan now run slower and only when needed, I…
dotswe
  • 380
  • 1
  • 2
  • 11
5
votes
2 answers

What happened around 2012~2013 in 3D printing field

Comparing trends show that 3D printing stepped over to another level around 2012~2013. Why?
Megidd
  • 203
  • 1
  • 7
5
votes
2 answers

Uploading Repetier firmware to Arduino?

I have a prusa i3 and have been trying to calibrate it. I have been trying to upload the new steps per mm and I get to done uploading. However when I go into Repetier host and type M503 to get the printers settings it still shows the steps as 100…
Dakota Miller
  • 603
  • 7
  • 13
5
votes
3 answers

Options for making Ender 3 v2 fans quieter

I have had my Ender 3 v2 for just over two months and have had a blast working with it. I have printed some mods to personalize it. One of the things that I have done to help mitigate the vibrational noise is to place my Ender 3 on a concrete paver…
agarza
  • 1,734
  • 2
  • 16
  • 33
1 2 3
…
99 100