0

I would like to create a profile, in the Prusa Slicer software, that could be preset so that in the last layer the nozzle is at 210 °C of temperature so that the printer ensures that the inner and outer walls are well together and do not become loose in the layer higher. I have very thin 0.7 mm walls and I usually have problems with the walls opening every now and then...

0scar
  • 37,708
  • 12
  • 68
  • 156
LCarvalho
  • 239
  • 2
  • 6

1 Answers1

1

In the printer settings custom G-code you could add a custom G-code there

{if layer_num == (total_layer_count-1) } M104 S210 {endif}

But that does not sound right why not start with 210 °C in the first place? It is perfectly OK to print PLA at 210 °C.

agarza
  • 1,734
  • 2
  • 16
  • 33
kolergy
  • 327
  • 1
  • 4